I ran into a bit of a hiccup in preparing for a brewday this weekend. I had just finished preparing my starter and was getting it setup on the stir plate. After the usual jostling, I got the stir bar engaged to the magnet in the stir plate and turning slowly. Satisfied that everything was stable, I turned up the speed on the plate, producing the usual satisfying whirlpool in the starter. No sooner than I started my next task - checking my inventory of malt - did I hear a "ping"...followed by the sound of a slow drip of liquid.
Turning around I saw, to my horror, that the plate had thrown the stir bar and cracked the flask (you can see a bit of the crack, left-side of the image). The starter was too big for my smaller flask, so looking around I came across the only available container - a flask of flowers. Long story short, the flowers have been moved to a less visually pleasing container, and a bit of bleach rendered their vase clean and sanitary. The bottom is too thick for the stir plate to work, but it makes for a pretty starter!
A blog on craft beer, home brewing, and yeast wrangeling
Sui Generis Brewing Has Moved
Sui Generis Brewing has moved to a new website, located at http://www.suigenerisbrewing.com. No additional posts will be made here at blogspot and commenting has been disabled. I encourage you to redirect your RSS feed to the updated feed, and to update your bookmarks.
Thank you for all your support over the past 5 years, and I hope you will join me in my new endeavor, over at http://www.suigenerisbrewing.com
Friday, 31 March 2017
Subscribe to:
Post Comments (Atom)
I love it!
ReplyDelete